Epson EpsonNet C82391, Administrator'S Manual

Page: 225 / 299

12
EPSON Status Monitor 2 (Windows only)
12-17
Toolbar
Many of the commands available on the Status Monitor menus
can be accessed directly by clicking the buttons on this toolbar. If
you point to a toolbar button, the corresponding menu command
appears briefly on your screen, and an explanation of the button’s
function appears in the Status Bar at the bottom of the Status
Monitor window.
Note for Windows 2000, NT 4.0, and NT 3.51:
Job Status is not available.
Note:
❏
Close the Printer list window when not needed: the window uses
computer resources if left open.
❏
If you change the printer port setting ( Print to the following port
or Print to ) in the printer driver, quit EPSON Status Monitor 2 as
described in “Stopping Monitoring” on page 12-28, and then restart
it.
Installed Printers list
This list displays information about the EPSON printers that are
connected to your computer through the network and have
printer drivers installed in your system. To change the printer
information that is displayed in this list, see “View menu” on page
12-16.
Printer Name
Provides the names of the installed printers. You can add or delete
printers to be monitored by choosing
Add Printer or Delete
Printer from the Settings menu. To save computer resources and
reduce network traffic, delete printers you do not need to monitor.
(Doing so does not remove the printer driver from your
computer.)