Epson EpsonNet C82391 Administrator'S Manual Download Page 192

Page: 192 / 299

10-30

The EpsonNet Configuration Utility

Optional screens

Administrator

You can link to the web site specified in this screen when you click

Favorite

(the name is changeable) in the Index.

Note:

Links to ftp are not supported.

Reset

You can reset the interface card or return the settings to the default
values.

Items

Explanations

Administrator Name

Enter the name of the administrator (up to128
characters).

Location

Enter the location of the interface card (up to
255 characters).

Favorite Name

Enter the link item name (up to 20 characters)
which will be displayed in the Index menu.

Favorite URL

Enter a URL (up to 64 characters).

Description

Enter any comments concerning the URL
above (up to 64 characters).

SUBMIT button

Saves any changes.

Items

Explanations

RESET button

Functions like turning the power off and on
again. Click this button to make the changes
take effect.

RETURN TO DEFAULT button

Returns the interface card to the default
settings.

Summary of Contents for EpsonNet C82391












































































































































































































































































































Search results

Summary of Contents for EpsonNet C82391

Reviews:

Brands by name

Popular brands

Epson EpsonNet C82391, Administrator'S Manual

Search results

Summary of Contents for EpsonNet C82391

Reviews:

Brands by name

Popular brands