Epson EB-Z10000U, User Manual

Page: 188 / 233

Reading error notification emails
When the mail notification function is set to On and a problem or warning
occurs in the projector, the following email will be sent.
Mail sender: Address for Address 1
Subject: EPSON Projector
Line 1: The projector name where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The main message
contents are listed below.
•
Clean Air Filter
•
No Air Filter
•
Internal error
•
Fan related error
•
Sensor error
•
Lamp timer failure
•
Lamp Warning (1)/Lamp Warning (2)
•
Lamp out
•
Lamp type mismatch
•
Incorrect projection mode
•
Internal temperature error
•
High-speed cooling in progress
•
Lamp replacement notification (1)/Lamp replacement notification (2)
•
Low Air Flow
•
Low Air Flow Error
•
Peltier Device error/ Pump Error
•
Shutter Warning
•
Shutter Error
•
Cinema Filter Warning
•
Cinema Filter Error
•
No-signal
No image signal is input to the projector. Check the connection status or
check that the power for the signal source is turned on.
•
Auto Iris Error
•
Power Warning. (Ballast) (1)/Power Warning. (Ballast) (2)
•
Power Err. (Ballast)
See the following to deal with problems or warnings.
s
"Reading the Indicators" p.141
Monitoring and Controlling
188