Epson EB-Z10000U, User Manual

Page: 109 / 233

Entering the Password
When the password entry screen is displayed, enter the password using the
remote control.
While holding down the [Num] button, enter the password by pressing the
numeric buttons.
When you enter the correct password, Password Protection is temporarily
released.
Attention
•
If an incorrect password is entered three times in succession, the message
"The projector's operation will be locked." is displayed for approximately five
minutes, and then the projector switches to standby mode. If this happens,
disconnect the power plug from the electrical outlet and then reinsert it and
turn the projector's power back on. The projector displays the password entry
screen again so that you can enter the correct password.
•
If you have forgotten the password, make a note of the " Request Code :
xxxxx" number that appears on the screen and contact the nearest address
provided in the Epson Projector Contact List.
s
Epson Projector Contact List
•
If you continue to repeat the above operation and input the wrong password
30 times in succession, the following message is displayed and the projector
does not accept any more password entries.
"The projector's operation will be locked. Contact your nearest Epson service
center."
s
Epson Projector Contact List
Security Functions
109