Using the Mail Notification Function to Report
Problems (EB-93 Only)
When you set Mail Notification, notification messages are sent to the preset
email addresses when a problem or warning occurs with a projector. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
s
Network
-
-
Mail Notification
a
•
Up to a maximum of three notification destinations (addresses) can
be registered, and notification messages can be sent to all three
destinations at once.
•
If a projector develops a critical problem and suddenly stops
working, it may not be able to send a message notifying an operator
of the problem.
•
If you set
Standby Mode
to
Communication On
, you can control
the projector even if it is in standby mode (when the power is
off).
s
Extended
-
Standby Mode
Reading Error Notification Mail
When the Mail Notification function is set to On and a problem or warning
occurs in the projector, the following email will be sent.
Subject: EPSON Projector
Line 1: The projector name where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The main message
contents are listed below.
•
Internal error
•
Fan related error
•
Sensor error
•
Lamp timer failure
•
Lamp out
•
Internal temperature error
•
High-speed cooling in progress
•
Lamp replacement notification
•
No-signal
No Signal is input to the projector. Check the connection status or check
that the power for the signal source is turned on.
•
Auto Iris Error
•
Power Err. (Ballast)
See the following to deal with problems or warnings.
s
Management Using SNMP (EB-93 Only)
By setting
SNMP
to
On
in the Configuration menu, notification messages
are sent to the specified computer when a problem or warning occurs. This
will enable the operator to be notified of problems with projectors even at
locations away from the projectors.
s
Network
-
Others
-
SNMP
Monitoring and Controlling
63
Summary of Contents for EB-92
