Epson dreamio EH-R2000 User Manual Download Page 9

Page: 9 / 86

Part Names and Functions

Remote control

•

buttons

p.18, 21, 23, 30

Press to select menu items and
adjustment values.

•

Source buttons

p.15

Switch between equipment
connected to the projector.

•

Lens buttons

p.16

Lens Shift button:
Moves the images horizontally and
vertically.
Zoom button:
Adjusts the image size.
Focus button:
Adjusts the image focus.

•

Lens Iris button

p.25

Adjusts the brightness by
changing the luminance of
the light through the lens.

•

Super-resolution button

p.25

Uses super-resolution processing to
adjust the images so that out-of-focus
areas such as the edges can become
sharper.

•

Frame Interpolation
button

p.40

To make the moving images
smoother and sharper, reduces
image lags caused by quick
movements.

•

HDMI Link buttons

p.48

Used for operations such as
playback, stop and volume
adjustment for connected HDMI-
CEC compatible devices.

•

Remote control light-emitting area

p.13

Outputs remote control signals.

•

Illumination button

Illuminates all of the buttons on the
remote control for 15 seconds so
that they can be seen in dark
places.

•

Power buttons

p.14, 15

Turns the projector power on/off.

•

Enter button

p.18, 26, 30

While viewing a menu, press this
button to select the menu item and
proceed to the next display.

•

Blank button

Turns off and on the projected
images temporarily.
When pressed while the
configuration menu is displayed,
or while a menu is displayed by
pressing

, the

menu screen disappears and
appears.

•

Esc button

p.18, 21, 30

Returns to the previous menu when
pressed while displaying the menu.

•

Color Mode button

p.18

Changes the color mode to suit the
projection environment.

•

Aspect

button

p.19

Changes the aspect ratio to match
the input signal.

•

Pattern button

p.17

Displays and clears the test
pattern.

•

RGBCMY button

p.21

Adjusts the hue, saturation and
brightness for each RGBCMY color.

•

Memory button

p.26

Saves, loads, and erases
memory contents.

•

Menu button

p.30

Displays/closes the configuration
menu.

•

Default button

Restores default settings when
menu is displayed.

Summary of Contents for dreamio EH-R2000























































































Search results

Summary of Contents for dreamio EH-R2000

Reviews:

Related manuals for dreamio EH-R2000

Brands by name

Popular brands

Epson dreamio EH-R2000, User Manual

Search results

Summary of Contents for dreamio EH-R2000

Reviews:

Related manuals for dreamio EH-R2000

Brands by name

Popular brands