61
Problem Solving
T
roub
leshooting
■
Images appear dark
■
Projection stops automatically
Problems when projection starts
■
Power does not turn on
Has the image brightness been
adjusted correctly?
Use the "Brightness" menu commands to make the adjustments.
"Image" - "Brightness" p.38
Has the image contrast
been adjusted correctly?
Use the "Contrast" menu command to adjust the color.
"Image" - "Contrast" p.38
Is the lamp due for
replacement?
When the lamp is nearly due for replacement, the images will
become darker and the color quality will become poorer. When this
happens, the lamp should be replaced with a new one.
p.69
Has the lens iris been adjusted
correctly?
Adjust the "Lens Iris" setting.
p.25
Is sleep mode active?
When "Sleep Mode" has been set to On, the lamp turns off
automatically if no signal is input for about 30 minutes, and the
projector switches to standby mode. Press the
L
on the remote
control or the
A
on the projector's control panel to turn the
projector's power back on. To cancel the sleep mode setting, change
"Sleep Mode" menu command to "Off".
"Settings" - "Operation" - "Sleep Mode" p.42
Have you pressed the [Power]
button?
Press
L
on the remote control or
A
on the projector's control
panel.
Is "Child Lock" set to "On"?
If the "Child Lock" menu command is set to "On", press
A
on the
projector's control panel for about 3 seconds or press
L
on the remote
control to turn the power on.
"Settings" - "Operation" - "Child Lock" p.42
Are all of the indicators
switched off?
Disconnect the power cable and then reconnect it.
p.14
Check the circuit breaker to see if power is being supplied.
Do the indicators turn off and on
when the power cable is
touched?
Turn the power off, disconnect the power cable and then reconnect
it. If this does not solve the problem, there may be a problem with
the power cable. Then contact your local dealer or the nearest
address provided in the
Support and Service Guide
.
Epson
Projector Contact List
Summary of Contents for dreamio EH-R2000
Page 1: ......
