40
Configuration Menu Functions
(This can be set only when "Aspect" is set to "Zoom".)
This function moves the display position of the image in one direction, up or down, to display captions
when projecting images with captions.
This adjusts the images if vertical stripes appear in the images.
This adjusts the images if flickering, fuzziness or interference appear in the images.
• Flickering and fuzziness may also occur when the brightness, contrast and sharpness settings are
adjusted.
• Clearer adjustments can be obtained if you adjust the "Tracking" first and then adjust the "Sync.".
(Setting is not possible when signals are being input from the [HDMI1] /[HDMI2] input port.)
When part of the image is clipped, move the image display position vertically and horizontally so that the
entire image is projected. Press
w
,
x
,
y
and
z
to adjust the position.
(This can be set only when signals are being input from the [Video] / [S-Video] input port, or 480i, 576i,
1080i signals are being input from the [Component] / [HDMI1] / [HDMI2] input port.)
Interlace (i) signals are converted to progressive (p) signals using a method appropriate for the image.
• Video
: This is ideal for general video images.
• Film
: This is ideal for film images. Select this if the setting is "Auto" and flickering appears in
the film images.
• Auto
: Optimum conversion is performed for movie, computer graphics, and animation input
signals.
The current and previous frames are compared, and the frame in the middle of them is interpolated to
reduce fuzziness and to produce clearer moving images. The degree of interpolation can be set to "Low",
"Normal" or "High" as desired. Set to "Off" if noise occurs at the "Low", "Normal" or "High" setting.
This improves blurred images and rough edges, giving the projected images a fine, detailed appearance.
The larger the number is, the stronger the effect becomes.
p.25
This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts
images to their optimum condition when the input signal is changed. The three automatically adjusted
items are "Tracking", "Position" and "Sync."
(Setting is not possible when "Color Mode" is set to "x.v.Color".)
This reduces flickering of images.
Three modes are available. Select the mode to suit your liking.
Set "Off" when the image source, such as DVD, contains little electrical interference.
Not displayed when image signals are being input from a computer.
Only displayed for Computer image input (does not appear when signals from the [HDMI1] /[HDMI2] input port are being input)
Zoom Caption Pos.
*1
Tracking
*1
Sync.
*1
Position
*1
Progressive
*1
Frame Interpolation
*1
Super-resolution
*1
Auto Setup
Advanced
Noise Reduction
*1
*1 The setting values are stored separately for each image source and signal type.
Summary of Contents for dreamio EH-R2000
Page 1: ......
