45
Configuration Menu Functions
Configuration M
e
n
u
"Network" menu (EH-R4000 only)
You can check the setting status for each network.
Displays the projector name used to identify the projector when connected to a Network.
Shows whether DHCP is in use (On) or not in use (Off).
Shows the IP address to be assigned to the projector.
Shows the subnet mask for the projector.
Shows the gateway IP address for the projector.
Displays the MAC address.
Displays the projector name used to identify the projector when connected to a Network. When editing,
you can enter up to 16 single-byte alphanumeric characters.
Set a Password to use when you access the projector using compatible PJLink software. You can enter up
to 32 single-byte alphanumeric characters.
Set a password to use when making settings and controlling the projector using Web Control. You can
enter up to eight single-byte alphanumeric characters. Web Control is a computer function that allows
you to set up and control the projector by using the Web browser on a computer connected on a Network.
Set whether or not (On/Off) to use DHCP. If this is set to "On" you cannot set any more addresses.
You can input the IP Address assigned to the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following IP Addresses cannot be used.
0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
You can input the subnet mask for the projector. You can enter a number from 0 to 255 in each field of
the address. However, the following Subnet Masks cannot be used.
0.x.x.x to 254.x.x.x, 255.255.255.255
Network information
Projector Name
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Basic
Projector Name
PJLink Password
Web Control Password
Wired LAN
DHCP
IP Address
Subnet Mask
Summary of Contents for dreamio EH-R2000
Page 1: ......
