46
Configuration Menu Functions
You can input the IP address for the gateway for the projector. You can enter a number from 0 to 255 in
each field of the address. However, the following gateway addresses cannot be used.
0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
You can set whether or not (On/Off) to be notified by e-mail.
You can input the IP Address for the SMTP Server for the projector.
You can enter a number from 0 to 255 in each field of the address. However, the following IP Addresses
cannot be used.
0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
You can input the Port Number for the SMTP Server. The default value is 25. You can input numbers
between 1 to 65535.
Input the Email Address and the contents of the Mail to receive notification when an abnormality or
warning occurs in the projector. You can enter up to 32 single-byte alphanumeric characters for the e-
mail addresses. You can select multiple problems or warnings to be notified about by Mail. You can also
change each Email Address.
When the projector is connected to a network, set this to "On" to allow the projector to be detected by
AMX Device Discovery. Set this to "Off" if you are not connected to an environment controlled with a
controller from AMX or AMX Device Discovery.
To reset all of the Network settings, select "Yes".
Gateway Address
Mail Notification
SMTP Server
Port Number
Address 1-3 Setting
AMX Device Discovery
Reset
Summary of Contents for dreamio EH-R2000
Page 1: ......
