Page 48
Print Start Page
—Select to specify that the RIP Station should print a start page every time
it restarts. The start page displays information about the RIP Station including the server
name, current date and time, Color Mode, Printer Mode, amount of memory installed in
the RIP Station, last calibration date, network protocols enabled, and connections enabled.
Enable Printed Queue
—Select to enable the Printed queue, which creates a storage location
on the RIP Station disk for recent jobs. Users with Administrator privileges can print jobs
from the Printed queue without sending them to the RIP Station again. If you disable the
Printed queue, jobs are deleted immediately after printing.
Jobs Saved in Printed Queue
—Enter the number of jobs (from
1
to
99
) to be saved in the
Printed queue. Jobs in the Printed queue take up space on the RIP Station hard disk.
Time
—Enter the correct system time, based on a 24-hour clock, in the form
HH:MM
(Hours:Minutes). The time is used on the cover page and on Job Logs.
Date
—Enter the correct system date. The date is used on the cover page and on Job Logs.
If you enter a number that is out of range in either the Time or the Date field, for example,
17
in the month field, you are prompted, when you dismiss the Server Setup menu, to enter
a number that is in range.
Use Character Set
—Specify whether the Control Panel should use the
Macintosh
,
DOS
, or
Windows
character set for displaying filenames. This is important if a filename includes
accented or composite characters (such as é, ü, or æ).
For mixed-platform networks, select the option that gives the best overall representation of
the special characters you use.
Passwords
In the Password tab, you can enter, change, or remove the Administrator password.
If the password already exists, it appears as asterisks in both the Enter New Password and
Verify New Password text boxes. If no password exists, the boxes are blank.
