Page 26
Job commands
Using the commands in the Job menu, you can alter the destinations, priorities and other
characteristics of jobs that appear in the Fiery WebSpooler window.
Job commands are used to assign a selected job to a new destination or process. These
commands are available from the Job menu (see page 23). The job commands available at a
given time depend on the context; unavailable commands are dimmed.
The job commands available for selected jobs in the Job List window are listed in the
following table.
Overriding print settings
When logged in as Administrator, you can use the Override Print Settings command to
check and override the print option settings (properties) of all jobs.
You can use this command for several purposes:
• To override a setting based on printed output or other print device conditions
• To change settings for a duplicate of the original job
• To print a single copy of a job before printing the number of copies required by the user
Choose this:
To do this:
Delete Job(s)
Delete the job(s)
Cancel Printing
Cancel printing for selected job(s)
Cancel RIPping
Cancel RIPping for selected job(s)
Duplicate Job(s)
Duplicate one or more selected PostScript data jobs in the Spool or
Print areas. You can assign different print options or a different
destination to the duplicate job(s). (The Duplicate command
actually creates a reference to the original job, with the same name.)
Rename
Rename the job (PostScript file)
Print the job in its turn
After printing, keep the printed job in the Print area until the job
limit is reached.
Process Next
Give top priority to this job
RIP (and then print) it as soon as the processor is free, before other
waiting jobs
Option is dimmed if there are no other waiting jobs
Override Print Settings
View and override print settings for a selected job or a group of
selected jobs
