Epson C82314* User Manual Download Page 48

Page: 48 / 71

User Defined mode; documents are printed using the fonts
and orientation that the user specifies through use of the &%

font ID commands.

EXAMPLE: &%Z62,3

Specifies that the document is printed as formatted

when the primary paper tray is specified as the

paper source.

COMMAND 63: ALTERNATE PAPER TRAY ORIENTATION (LASER)

This command functions identically to Command 62 except it controls the

orientation for printing that specifies (SCS,LU1) the alternate tray for the paper
source.

Values are the same as Command 62 except substitute ‘alternate tray’ for

‘primary tray’ in the descriptions.

NOTES: Even if the printer does not have an alternate paper tray and defaults

to the primary tray, if the SCS (LUl) host specifies the alternate tray,
the interface prints the document in accordance with the selection in

Command 63.

The value 3 is an excellent choice when COR is not required, since
the user can decide the fonts and orientation he desires by using &%
font ID commands.

EXAMPLE: &%Z63,2

Specifies that landscape orientation will be used for
all printing in which the SCS (LU1) PPM code
specifies the alternate paper tray be used.

COMMAND 64: MANUAL FEED TRAY ORIENTATION (LASER)

This command functions identically to Command 62 except it controls the

orientation for printing when the PPM Command specifies the manual feed tray

far the paper source.

Values are the same as Command 62 except substitute ‘manual feed tray’ in

place of ‘primary tray’ in the descriptions.

NOTE:

A laser printer, upon receipt of the manual feed tray command, does

not proceed with printing until paper is placed into the manual feed

slot. This allows a user to insert special forms, letter head, or colored

paper into the manual feed slot.

Summary of Contents for C82314*








































































Search results

Summary of Contents for C82314*

Reviews:

Related manuals for C82314*

Brands by name

Popular brands

Epson C82314*, User Manual

Search results

Summary of Contents for C82314*

Reviews:

Related manuals for C82314*

Brands by name

Popular brands