Epson C82314* User Manual Download Page 39

Page: 39 / 71

COMMAND 36: SUPPRESS IBM CONTROL CODES

This function is used to select suppression of all or some IBM control codes

sent from the host system.

VALUE DESCRIPTION

Obey all IBM control codes

Suppress all IBM control codes

Suppress only LPI and CPI control codes

Suppress only CPI control codes

Suppress only LPI control codes

Suppress print quality specified in the PPM command.

NOTES: If this command is set to 1, documents will have to be formatted by

sending transparent control codes to the printer using Command-
Pass-Thru or SCS mode transparent data

If this command is set to 2, the SCS pitch (CPI) and line density (LPI)
commands are suppressed (Not sent to the printer).

EXAMPLE: &%Z36,2

No LPI or CPI commands are sent to the printer.

The printer prints using the user specified selections.

COMMAND 37: VERTICAL CHANNEL SELECT (VCS)

Specifies vertical channel select VCS) emulation.

VALUE DESCRIPTION

3287 VCS emulation

3268/4214/4224 VCS emulation

EXAMPLE: &%Z37,0

Selects 3287 VCS emulation

A-15

Summary of Contents for C82314*








































































Search results

Summary of Contents for C82314*

Reviews:

Related manuals for C82314*

Brands by name

Popular brands

Epson C82314*, User Manual

Search results

Summary of Contents for C82314*

Reviews:

Related manuals for C82314*

Brands by name

Popular brands