5
Changing Printer Settings From the Printer’s Control Panel
5-3
R4C3430
Rev. C
A5 size
CHAP5.FM
8/23/99
Pass 0
R
Proof Sign-off:
<Crestec>
_______
<Kimura>
_______
<Crestec>
_______
To select a pitch, press the
Pitch
button until the three Pitch lights
indicate the pitch you want as shown below.
About Your Printer’s Default Settings
The default settings control many printer functions. While you
can often set these functions through your software or printer
driver, you may sometimes need to change a default setting from
the printer’s control panel using the default-setting mode.
The following table lists the default settings and the options you
can select in the default-setting mode. The settings are explained
in detail after the table. For instructions on changing the default
settings, see “Changing default settings” on page 5-9.
Pitch lights
Pitch
o o n
10 cpi
o n o
12 cpi
o n n
15 cpi
n o o
17 cpi
n o n
20 cpi
n n o
PS
(proportional spacing)
n
= On,
o
= Off
Settings
Options
Page length for front
tractor*
Length in inches: 3, 3.5, 4, 5.5, 6, 7,
8, 8.5, 11, 70/6, 12, 14, 17 inches
Page length for rear
tractor*
Length in inches: 3, 3.5, 4, 5.5, 6, 7,
8, 8.5, 11, 70/6, 12, 14, 17 inches
Skip over perforation
On, Off
Auto tear-off
On, Off
Auto line feed
On, Off
