Epson C1100 - AcuLaser Color Laser Printer, Service Manual

Page: 52 / 565

EPSON AcuLaser C1100 Revision B
PRODUCT DESCRIPTION Control Panel 52
PRINTER ADJUST MENU
Note *1: Displayed only when the Support Mode has been selected by a special operation
when the power is turned on.
After changing the settings in the Printer Adjust Menu and pressing the Enter button,
the printer reboots.
*2: Displayed only when the Support Mode has been selected by a special operation
when the power is turned on.
After changing the settings in the Printer Adjust Menu and returning to the menu, the
printer reboots.
*3: After finished calibrating, the printer directly goes back to the normal operating
mode.
Maintenance Menu
Note *1: Displayed only when the Maintenance Mode has been selected by a special
operation when the power is turned on.
*2: Pressing the Enter button leaves the panel settings.
*3: Pressing the Enter button reboots.
Setting Value
Normal*
1
0 ~ 5 ~ 15
SemiThk*
1
0 ~ 5 ~ 15
Thick*
1
0 ~ 5 ~ 15
ExtraThk*
1
0 ~ 5 ~ 15
Card*
1
0 ~ 5 ~ 15
Envelope*
1
0 ~ 5 ~ 15
Feed Offset* 2 -3.5 to 0.0 to 3.5 mm
Scan Offset*
2
-3.5 to 0.0 to 3.5 mm
Feed Offset2*
2
-3.5 to 0.0 to 3.5 mm
Scan Offset2*
2
-3.5 to 0.0 to 3.5 mm
Calibration*
3
C H E C K
P O I N T
„
Secondary transfer voltage adjust value, from plain paper to
envelop, becomes same value between front side and reverse
side.
„
When printing both sides, offset value for reverse side is
displayed regardless of Duplex unit is installed or not.
C A U T I O N
Before using this function, refer to the instructions given in “1.15.3
Explanation of Menu and Settings” (p.54) .
Setting Value
Engine Status Sheet*
1
*
2
---
Print Log Report*
1
*
2
---
Reset 2ndBTRCounter*
1
*
3
---
Reset C DvlpCounter*
1
*
3
---
Reset M DvlpCounter*
1
*
3
---
Reset Y DvlpCounter*
1
*
3
---
Reset K DvlpCounter*
1
*
3
---
Reset Fuser Counter*
1
*
3
---
Clear Error Log*
1
---
MCU DATA BackUp*
1
*
2
---
MCU DATA Restore*
1
*
3
---