Epson C1100 - AcuLaser Color Laser Printer, Service Manual

Page: 488 / 565

EPSON AcuLaser C1100 Revision B
ADJUSTMENT Overview 488
5.1.3.2 Writing Method
The method of writing USB ID differs according to the condition of the main board. Referring to the following table, figure out what to do depending on the conditions.
Follow the instructions shown in the program to do the writings.
†
Store optional ID
†
Store auto-generated NEW ID
†
OLD ID Retrieval/Restore
5.1.3.3 Confirming the Writing
When completed to write USB-ID, print a status sheet to confirm that the serial number
printed on the sheet is identical to that on the label attached to the printer.
(Refer to
“ 1.19 Status Sheet” (p.67) )
Table 5-2. Writing Method
Condition of Main Board Check of the previous ID
Writing Method
(Button Name)
Descriptions
Communication is impossible between
PC and the Main Board The previous ID can be confirmed by a status sheet or
something else that has been already printed out.
Store optional ID
Enter the previous ID to write it into the new Main Board.
There is no way to confirm the previous ID. Store auto-generated
NEW ID
The program automatically creates the new ID from the serial
number of the printer and write it into the new Main Board.
Communication is possible between PC
and the Main Board (Can retrieve the previous ID from the previous Main Board) OLD ID Retrieval/
Restore
Retrieve the ID from the old board, and then enter the retrieved
ID value into the new board.