Auto LF
If you select
Off
, the printer does not send an automatic line-feed (LF) command with each
carriage-return (CR). If
On
is selected, a line-feed command is sent with each carriage-return. Select
On
if your text lines overlap.
Bit Image
The printer is able to emulate the graphics densities set with the printer commands. If you select
Dark
,
the bit image density is high, and if you select
Light
, the bit image density is low.
If you select
BarCode
, the printer converts bit images to bar codes by automatically filling in any
vertical gaps between dots. This produces unbroken vertical lines that can be read by a bar code reader.
This mode will reduce the size of the image being printed, and may also cause some distortion when
printing bit image graphics.
ZeroChar
Specifies whether the printer prints a slashed or unslashed zero.
FX Menu
Item
Settings (default in bold)
Font
Courier
, Prestige, Roman, Sans serif, Script, Orator S, OCR A, OCR B
Pitch
10cpi
, 12cpi, 15cpi, Prop.
Condensed
Off
, On
T.Margin
0.40 ...
0.50
... 1.50inch in 0.05-inch increments
Text
1 ...
66
... 81Lines
CGTable
PcUSA
, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic,
PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO
Country
USA
, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2,
LatinAmeric
Auto CR
On
, Off
Auto LF
Off
, On
Bit Image
Dark
, Light, BarCode
AL-M300/AL-M400 Series User's Guide
Using the Control Panel
82
