Printer’s Storage
Description
CompactFlash
*
The optional CompactFlash memory must be installed on your printer in order to use
the Reserve Job function. Make sure that the CompactFlash memory is correctly
recognized by the printer driver before you start using the Reserve Job function. The
CompactFlash memory must be at least 4 GB.
RAM Disk
An additional memory must be installed on your printer in order to use the Reserve Job
function.
To enable the RAM disk, you have to set the
RAM Disk
setting on the control panel to
Normal
or
Maximum
. For instructions about increasing your printer’s memory, see
“Installing a memory module” on page 116.
After the memory module is installed, you must update the option information. See
“Making Optional Settings” on page 170.
For AL-M400 Series users:
When both CompactFlash memory and a RAM disk are installed, CompactFlash
memory is given priority and makes the RAM disk unavailable.
*
Available only for AL-M400 Series.
The table below gives an overview of the Reserve Job options.
Reserve Job Option
Description
Re-Print Job
Lets you print the job now and store it on the printer’s memory. You can print the same
job several times.
Verify Job
Lets you print one copy now to verify the content. You can print multiple copies later.
Stored Job
*
Lets you store the print job on the printer’s memory without printing it now.
Note:
This option is not available when you have installed the optional RAM disk.
Confidential Job
Lets you apply a password to the print job. You can print the job entering the password
on the printer’s control panel.
*
Available only for AL-M400 Series.
Sending the print job
For Windows users
1. Click the
Optional Settings
tab, then click
Reserve Jobs Settings
. The Reserve Jobs Settings
dialog box appears.
2. Select the
Reserve Job On
check box, then select
Re-Print Job
,
Verify Job
, or
Confidential
Job
.
AL-M300/AL-M400 Series User's Guide
Printing Tasks
58
