Cause
What to do
The transfer roller may be dusty.
Perform
BTR Cleaning
in the
Printer Adjust Menu
. See
“Printer Adjust Menu” on page 89 for details.
The fixing temperature may not be appropriate.
Try to lower the temperature by adjusting the Temp settings in
the
Printer Adjust Menu
. However, do this at your risk, as
lowering the temperature too far may prevent normal fixing.
See“Printer Adjust Menu” on page 89 for details.
Print quality decreased
Cause
What to do
The printer cannot print in the required quality level
because of insufficient memory, and the printer lowers
the quality automatically so that the printer can continue
printing.
Check to see if the printout is acceptable. If not, add more memory
for a permanent solution or lower print quality temporarily in the
printer driver.
If
RAM Disk
is set to
Maximum
or
Normal
on the control panel, you
can increase the available memory space by changing this setting
to
Off
.
Memory Problems
Insufficient memory for current task
Cause
What to do
The printer has insufficient memory for current task.
Reduce the contents of print jobs, or increase the available
memory on your printer. You can increase the available memory
by installing an optional memory module. See “Installing a
memory module” on page 116 for details.
When
RAM Disk
is set to
Maximum
or
Normal
on the control panel,
you can increase the available memory space by changing this
setting to
Off
.
AL-M300/AL-M400 Series User's Guide
Troubleshooting
161
