Loading Print Media in the Priority Sheet Inserter (PSI)
1. First print the even pages (rear sides).
For a six page document, rear sides are printed in order of page 6, page 4, and then page 2.
The
Data
LED blinks and the
Insert Output to Tray
message appears on the LCD panel when
the even pages finish printing.
2. After the even pages are printed, remove the paper stack from the center output tray.
Note:
Warped or curled prints can cause paper jams. Straighten them before setting them.
3. Stack the prints and set them as they are (with the blank side facing up) into the PSI, and then press
the
button.
Epson AcuLaser MX14 Series User’s Guide
Printing Basics
93
