❏
Locked
❏
Password Locked
Setting the Time for the Power Saver Mode
You can set the Power Saving Timer for the printer. The printer switches to the Power Saver mode
after the specified time.
1. Press the
System
button.
2. Select
Admin Menu
, and then press the
button.
3. Select
System Settings
, and then press the
button.
4. Select
Power Saving Timer
, and then press the
button.
5. Select
Low Power Timer
or
Sleep Timer
, and then press the
button.
6. Press the or button or enter the desired value using the numeric keypad, and then press the
button.
You can select from 1-30 minutes for
Low Power Timer
or 6-11 minutes for
Sleep Timer
.
7. To return to the previous screen, press the
(
Back
) button.
Resetting to Factory Defaults
After executing
Initialize NVM
and rebooting the printer, the menu parameters or data are reset to
their factory default values.
Note:
The following procedure does not initialize the network settings.
❏
For the Epson AcuLaser MX14NF, to initialize the network settings, refer to “Initialize NVM” on
page 212.
1. Press the
System
button.
2. Select
Admin Menu
, and then press the
button.
Epson AcuLaser MX14 Series User’s Guide
Using the Operator Panel Menus and Keypad
250
