Epson AcuLaser MX14, User Manual

Page: 203 / 333

Option Description
Ans Select TEL Mode
Automatic fax reception is turned off. You can receive a fax by picking up the
handset of the external telephone, pressing the remote receive code, and
then pressing the
( Start ) button.
FAX Mode * Automatically receives faxes.
TEL/FAX Mode When the printer receives an incoming fax, the external telephone rings for
the time specified in
Auto Ans. TEL/FAX
, and then the printer automatically
receives a fax. If an incoming call is not a fax, the printer beeps from the
internal speaker indicating that the call is a telephone call.
Ans/FAX Mode The printer can share a telephone line with an answering machine. In this
mode, the printer will monitor the fax signal and pick up the line if there are
fax tones. If the phone communication is using serial transmission in your
region, this mode is not supported.
DRPD Mode Before using the Distinctive Ring Pattern Detection (DRPD) option, a
distinctive ring service must be installed on your telephone line by the
telephone company. After the telephone company has provided a separate
number for faxing with a distinctive ring pattern, configure the fax setup to
monitor for that specific ring pattern.
Auto Answer Fax
Sets the interval at which the printer goes into the fax receive mode after
receiving an incoming call.
Auto Ans. TEL/FAX Sets the interval at which the printer goes into the fax receive mode after the
external telephone receives an incoming call.
Auto Ans. Ans/FAX Sets the interval at which the printer goes into the fax receive mode after the
external answering machine receives an incoming call.
Line Monitor Sets the volume of the line monitor, which audibly monitors a transmission
through the internal speaker until a connection is made.
Ring Tone Volume Sets the volume of the ring tone, which indicates that an incoming call is a
telephone call through the internal speaker when
Ans Select
is set to
TEL/
FAX Mode
.
Line Type Sets the line type.
Dialing Type Sets the dialing type.
Note:
This menu is not displayed when Region is set to South Africa.
Interval Timer Specifies the interval between transmission attempts.
Number of Redial
Specifies the number of redial attempts to make when the destination fax
number is busy. If you enter 0, the printer will not redial.
Redial Delay
Specifies the interval between redial attempts.
Epson AcuLaser MX14 Series User’s Guide
Faxing (Epson AcuLaser MX14NF Only) 203