❏
Do not insert your hand deep into the fuser unit as some components are sharp and may cause
injury.
❏
Never push objects of any kind through cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a risk of fire or electric shock.
❏
Do not sit or lean on the printer. Do not put heavy objects on the printer.
❏
Do not use any kind of combustible gases in or around the printer.
❏
Never force the printer’s components into place. Although the printer is designed to be sturdy,
rough handling can damage it.
❏
Do not leave jammed paper inside the printer. This can cause the printer to overheat.
❏
Never spill liquid of any kind on the printer.
❏
Adjust only those controls that are covered by the operating instructions. Improper adjustment
of other controls may result in damage and may require repair by a qualified service
representative.
❏
Do not turn off the printer:
-After turning on the printer, wait until Ready appears on the LCD panel.
-While the Ready light is flashing.
-While the Data light is on or flashing.
-While printing.
❏
The printer has an earth leakage circuit protector on its back. Be sure to ground the printer.
❏
Avoid touching the components inside the printer unless instructed to do so in this guide.
❏
Follow all warnings and instructions marked on the printer.
❏
Except as specifically explained in the printer’s documentation, do not attempt to service this
product yourself.
❏
Periodically disconnect the plug from the electrical outlet and clean the blades.
❏
Do not disconnect the plug while the printer is on.
❏
If the printer will not be used for a long time, disconnect the plug from the electrical outlet.
❏
Unplug this printer from the wall outlet before cleaning.
❏
Use a well-wrung cloth for cleaning and do not use liquid or aerosol cleaners.
EPSON AcuLaser M8000 Series User's Guide
Safety Instructions
19
