The imaging cartridge has reached the end of its service life and need to be replaced. See “Replacing
Consumable Products” on page 147 for instructions.
Replace Transfer Unit
The transfer unit has reached the end of its service life and needs to be replaced. If this error occurs,
consult your dealer.
Reserve Job Canceled
The printer cannot store the data of your print job using the Reserve Job function. The maximum
number of print jobs stored on the printer’s memory has been reached, or the memory has no more
memory available to store a new job. To store a new print job, delete a previously stored job. Also, if
you have any Confidential Jobs stored, printing those jobs will make more memory available.
You may also increase the available memory space by changing the
RAM Disk
setting to
Normal
or
Maximum
. For details, see “Setup Menu” on page 72.
To clear this error, select
Clear Warning
from the control panel’s
Reset Menu
. For instruction
about accessing the control panel menus, see “How to access the control panel menus” on page 64.
Reset
The printer’s current interface has been reset and the buffer has been cleared. However, other
interfaces are still active and retain their settings and data.
Reset All
All printer’s interface has been reset and the buffer has been cleared. The printer reboots
automatically.
Reset to Save
A control panel menu setting was changed while the printer was printing. Press the
Start/Stop
button
to clear this message. The setting will become effective after printing has finished.
Alternatively you can clear this message by performing
Reset
or
Reset All
on the control panel.
However, the print data will be deleted.
ROM CHECK
The printer is checking the ROM.
SELF TEST
EPSON AcuLaser M8000 Series User's Guide
Using the Control Panel
101
