Epson AcuLaser M4000 Series User Manual Download Page 54

Page: 54 / 217

AcuLaser M4000 Series

User's Guide

Using the Control Panel

Use the

and

Down

buttons to scroll through available settings, then press the

Enter

button to select a setting and return to the previous level. Press the

Back

button to return to

the previous level without changing the setting.

Note:

❏

You need to turn the printer off and then on to activate some settings. For details, see “Control Panel
Menus” on page 55.

❏

The

button can be used instead of the

Enter

button in step 3 or 5.

6. Press the

Start/Stop

button to exit the control panel menus.

How to register menus as bookmarks

By registering bookmarks for frequently used menus, you can display the registered menus by just
pressing the

button while the LCD panel displays

Ready

Sleep

Note:

The maximum number of menus you can register as bookmarks is 3.

1. Display the menu to register. For details, see “How to access the control panel menus” on page

53.

2. Press the

button for more than two seconds.

The

Add Bookmark

menu appears.

Note:

Some menus cannot be bookmarked. If you tried to register them,

Bookmark Failed

is displayed.

3. Press the

and

Down

buttons to select the menu to delete, then press the

Enter

button.

Note:

To register a new menu, you have to delete one of the registered menus from the bookmark.

Bookmark Registered

is displayed, the menu is bookmarked successfully.

Note:

To delete the bookmarked menus, select

Reset All

from the control panel’s

Reset Menu

Summary of Contents for AcuLaser M4000 Series


























































































































































































































Search results

Summary of Contents for AcuLaser M4000 Series

Reviews:

Related manuals for AcuLaser M4000 Series

Brands by name

Popular brands

Epson AcuLaser M4000 Series, User Manual

Search results

Summary of Contents for AcuLaser M4000 Series

Reviews:

Related manuals for AcuLaser M4000 Series

Brands by name

Popular brands