72
Note:
The top margin is automatically set to 30 mm, regardless of the
margin setting.
You can change the margins for roll paper with the printer in the
LCD panel. Refer to “Using the Print Mode Settings” on page 33
to print without margins on either side of your printout.
Printing on Roll Paper
Once you have prepared your roll paper and it is loaded in the
printer, you must make settings in the LCD panel in order to print.
Note:
❏
Always check the ink levels before printing on roll paper as replacing
ink cartridges while the roll paper is loaded can smear the paper.
❏
We recommend replacing the roll paper with a new roll when there
is 20 cm remaining. Otherwise, print quality may be compromised
on the remaining portion.
❏
Do not select A4, 100
×
150 mm, 89
×
127 mm or 127
×
178 mm
sheet paper for the Paper Size setting when roll paper is loaded in
the sheet feeder. Doing so causes unnecessary paper to be fed after
each print job. If you have already started printing, press the
Cancel
button. Wait until the printer stops printing and feeding
paper. Cut off the paper at the back of the printer, then turn off the
printer. The remaining paper is ejected.
Standard margins
Borderless
