102
❏
Make sure that the paper stack fits under the arrow mark
located on the inside surface on the left edge guide.
❏
Make sure that the left edge guide is snug to the left edge of
the paper.
❏
Make sure that the paper is not curled or folded. If so, flatten
it or curl it slightly toward the opposite side before loading.
❏
Make sure that the position of the adjust lever is appropriate
for the media type. When printing on media of normal
thickness, set the adjust lever to the
m
position. When printing
on envelopes and thick media, set the position to
^
.
❏
Remove the stack of paper and make sure that the paper is
not too thin. See “Paper” on page 117 for specifications. Fan
the edges of the stack to separate the sheets, then reload the
paper.
Paper jams
For a sheet paper jam, turn the printer off, open the printer cover,
remove all of the paper inside including any torn pieces, close the
printer cover, turn the printer on, and then reload the paper in the
sheet feeder.
For a roll paper jam, hold down the
z
roll paper button for about
3 seconds to feed the paper in reverse. If the paper does not feed
in reverse completely, hold down the
z
roll paper button for
about 3 seconds to feed the paper in reverse again. And then roll
up the roll paper. If the error does not clear, turn the printer off,
open the printer cover, gently remove the roll paper backward,
and then close the printer cover.
Note:
If you cannot remove a foreign object easily by yourself, do not use force
and do not disassemble the printer. Call your dealer for assistance.
