97
Vertical misalignment or banding
Try one or more of these solutions:
❏
Make sure that the printable side of the paper is face up in the
sheet feeder.
❏
Run the Head Cleaning utility to clear any clogged ink
nozzles.
&
See “Cleaning the Print Head” on page 85.
❏
Make sure that the Media Type setting selected in the LCD
panel is appropriate for the type of media loaded in the
printer.
❏
Make sure that the position of the adjust lever is appropriate
for the media type. When printing on media of normal
thickness, set the adjust lever to the
m
position. When printing
on envelopes or thick media, set the position to
^
.
Color gaps
Try one or more of these solutions:
❏
Make sure that your paper is not damaged, dirty, or too old.
Also, make sure that the printable side of the paper is face up
in the sheet feeder.
❏
Run the Head Cleaning utility to clear any clogged ink
nozzles.
&
See “Cleaning the Print Head” on page 85.
❏
Check the LCD panel. If the ink icon is flashing or a message
is displayed, replace the appropriate ink cartridge.
&
See “Replacing an Ink Cartridge” on page 77.
❏
Make sure that the Media Type setting selected in the LCD
panel is appropriate for the type of media that is loaded in the
printer.
