65
2. Check that the end of the roll is cut perpendicularly to the
edges as shown below.
c
Caution:
Always use a T sguare or similar tool to ensure that the end
of the roll is cut perpendicularly at a right angle. A diagonal
cut may cause paper feed problems.
3. To flatten the roll paper, place it printable-side up between
the pages of the instruction booklet packaged with the roll
paper to protect it. Then, roll the booklet in the direction
opposite of the paper’s curl.
4. Remove the paper support, lower the output tray, slide out
the extension (for other than 210 mm roll paper) or attach the
catcher (for 210 mm roll paper), and then turn on the printer.
c
Caution:
❏
Care should be taken not to damage your eyes with the
tip of the catcher.
❏
Keep the catcher out of the reach of children.
