105
LCD panel came on and then went out
The printer’s voltage may not match the outlet rating. Turn off the
printer and unplug it immediately, then check the printer labels.
If the voltage does not match, DO NOT PLUG YOUR PRINTER
BACK IN. Contact your dealer.
Maintenance light is flashing or on
Try one or more of these solutions:
❏
Make sure that there is no packing material in the printer.
❏
If the printer sounds like it is trying to print, but is unable to,
run the Head Cleaning utility. See “Cleaning the Print Head”
on page 85.
❏
If the
(
maintenance light is on and paper is jammed in the
printer, remove the paper from the printer.
❏
If the
(
maintenance light is on and no paper is loaded, load
more paper in the sheet feeder.
❏
If the
(
maintenance light is flashing, ink is low. Obtain a
replacement cartridge of the appropriate type. To determine
which cartridge is low, see “Replacing an Ink Cartridge” on
page 77.
❏
If the
(
maintenance light is on and ink is out, replace the
appropriate ink cartridge. To determine which ink cartridge
is empty, see “Replacing an Ink Cartridge” on page 77.
