41
Roll Paper Cut
When roll paper is used for printing, whether the paper is cut
automatically by page can be selected. This setting is not lost when
the printer is turned off. The default setting is None.
Cut After Last Page
When roll paper is used for printing, whether the paper is cut
automatically at the end of page can be selected. This setting is
not lost when the printer is turned off. The default setting is On.
None
The roll paper is printed without being cut between
pages. No space is left between pages.
Single cut
The paper is cut at the boundary between images
(the boundary between pages). However, the
cutting position may shift slightly.
Double cut
If you have selected Single Cut and are unhappy
with the gap of the cutting position, select Double
Cut. In this mode, the space between images is
extended and the paper is cut twice inside this
space. By cutting twice, an 18 mm slip of paper is left.
On
Cuts the last page.
This is enabled when the Single cut or Double cut is
selected as the Roll Paper Cut setting.
Off
Does not cut the last page.
Press the <Roll Paper button TP icon> Roll Paper
button to cut the remaining page in the printer.
