101
Paper does not feed
Remove the stack of paper and make sure of the following:
❏
The paper is not curled or creased.
❏
The paper is not too old. See the instructions that came with
the paper for more information.
❏
The paper is not loaded higher than the arrow on the left edge
guide.
❏
Paper is not jammed inside the printer. If it is, remove the
jammed paper.
❏
The black and/or color ink cartridges are not empty. If one is,
replace the appropriate cartridge. To determine which
cartridge is empty, see “Replacing an Ink Cartridge” on page
77.
❏
Load the paper again. Make sure that you follow any special
loading instructions that came with your paper. Also see
“Paper Handling” in the online
and “Media
Multiple pages feed
❏
For the users directly printing from memory card, do not
select A4, 100
×
150 mm, 89
×
127 mm or 127
×
178 mm sheet
paper for the Paper Size setting when roll paper is loaded in
the sheet feeder. Doing so causes unnecessary paper to be fed
after each print job. If you have already started printing, press
the
Cancel
button. Wait until the printer stops printing and
feeding paper. Cut off the paper at the back of the printer, then
turn off the printer. The remaining paper is ejected.
