Stand 31.07.08, PW 30, PW 30 HV, Profile roll
Page 18 of 50
3.4
Positioning and assembly
3.4.1 Claims to installation location
The machine may not be in an explosive area. The machine is therefore
not construed. The acceptable environmental conditions have to be
followed at the installation location. Organise the installation location
according to the safety regulations for the use of this machine. See that
the installation location is not limited for the use, attendance and
maintenance.
Guarantee a boundless and free amenability of the mains plug and all
operation unit of the machine.
3.4.2 Load rope stops
The machine only may be lifted at the adequate areas with adequate
lifting device and load rope devices. Observe the balance point of the
machine.
Observe that during lifting no add
– on parts ort he lacquer get
damaged.
Machine weight
PW 30
191 kg
PW 30 HV
191 kg
In this case the manufacturer can not assume responsibility.
3.4.3 Positioning plan
Observe during the positioning of the machine, that the design of the
work place is ergonomic and follow the accident prevention regulations
for your business. The use, attendance and maintenance may be not
limited.
Bethink: A cramped work place recovers accident risks.
3.4.4 Positioning
Observe that the bottom/ ceiling are stable enough. If the rigidity is not
enough, it can come to oscillations between machine and bottom This can
lead to failures at the machine and adjoining units.
