Stand 31.07.08, PW 30, PW 30 HV, Profile roll
Page 29 of 50
6 Roller sets
The roller bending of different profiles calls for different roller sets. We present you here
the common profile rolls. Please have a look at our main catalogue for the additional
roller sets of Epple Maschinen GmbH.
6.1
Round material massive
By default round profile rolls are turned off at radius depth.
Standard roller sets Rollers with overlaying flanks
You achieve best results with rollers that have flanks that are lying over the
radius.
6.2
Round material cavernous (tube)
Standard roller set Rollers with overlaying flanks
6.3
Square massive
By default profile rolls are turned off at low depths. You achieve better results
with rollers that have flanks that are lying over the radius.
6.4
Square cavernous (tube)
6.5
U-profile straight external bow
6.6
U-profile straight internal bow
