Epever EG1200CU, User Manual

Page: 20 / 32

the flashing bit will be moved right or left by
pressing
→ or ←, the value will be added or
subtracted by pressing
↑ or ↓ . Press OK or ESC
button to save the value or not. The current status
will be maintained when setting up the device.
▼Real-time Interface — Output Current
The output current value can be set directly in this
page. The setting procedure is the same with the
“output voltage”. The device will not stop running
when setting in both modes.
▼Real-time — Output Power
Real-time output power can’t be set in both modes.
▼Real-time — Input Voltage
Real-time input voltage can’t be set in both
modes.
▼Real-time — Date
The real-time date value can be set in this page.
The setting procedure is the same with the
“output voltage” in both modes.
▼Real-time — Time
The real-time time value can be set in this page.
The setting procedure is the same with the
“output voltage”. This page exists in both modes.
▼Set Interface — Device Address
The device’s ID can be set in this page without
C.OUT 20.0
P.OUT 1200
V.IN 220
DT.14.05.18
TM.09.12.55
ID. 02
-16-