Epever EG1200CU, User Manual

Page: 13 / 32

it has been finished then the product will be converted to automatic float
charge mode automatically and the yellow LED will be lighted on solid.
The Equalize Duration will be paused until the condition is satisfied again
if the voltage point is less than the value that is lower 0.5V than the
equalize setpoint in half-way.
There are two buttons on the panel, one is forced equalize charge and the
other is forced float charge. It will be converted to forced equalize
charging mode and the green LED flashes when pressing the forced
equalize charging button in float charging mode. The next cycle is
automatic equalize charging mode when the Equalize Duration and
Equalize Calendar are finished after enabling the forced equalize charging
mode. The function is invalid when the power supply has been in
equalize charging mode. It will be converted to forced float charging
mode and the yellow LED flashes when pressing the forced float charging
button in equalize charging mode. The function is invalid when the power
supply has been in float charging mode. The device will keep in float
charging mode after the forced float charging mode has been enabled.
The Equalize Calendar timer which has been started will be cleared (it
starts once again until the Equalize Duration finished) when pressing the
forced equalize charging button. The Equalize Duration which has been
started without finishing will be paused when pressing the forced float
charging button. It will not be cleared until the Equalize Calendar has
-9-