Epever EG1200CU, User Manual

Page: 15 / 32

Figure 4-2 Parallel connection

Series Running
Multiple same type equipments can be connected in series, but the current
value of output should be set consistently. Turn on the power supply one
by one. The load current is the same with each power supply and the
voltage is the sum of each power supply. The wiring diagram is shown
below.
Suggest: The output of each power supply should parallel a power
resistance of 10k / 1w and a protection diode (pay attention to the
technical parameters of the diode).
Cathode
-
Anode
+
Digital power
supply
+ -
Digital power
supply
+ -
Digital power
supply
+ -
Figure 4-3 Series connection
Digital
power
supply
Digital
power
supply
Digital
power
supply
Cathode
-
Anode
+
-11-