EOS EmoTouch II +, User Manual And Operating Manual

Page: 16 / 30

16
GB
Symbol description (start screen)
Operation principle with a touch screen GUI
On the GUI (sauna cabin image) you can switch the functions by touching shortly the correspond-
ing objects (e.g. lamp). By touching these objects >3 sec you can make settings (adjustments).
The symbols in the lower black strip (except for “settings”) should be touched for >3 sec for safety
reasons.
Sauna heater (heating) on/off
Switching the sauna heating on/off, to switch on touch for >3 sec, to switch off touch the symbol once
shortly.
Return
In all sub-menus - return to start screen, to the
previous menu or to the previous selection.
Auto-Start
Settings for the switching-on time pre-selection (pre-set timer) - to program the automatic switching at a
later time up to 24 h in advance or to program the week timer / single switching time.
Profiles
User profiles (1 - 8) for individual settings.
Settings
Sub-menu for additional (extended) settings. Like e.g. language, time, date, screensaver, special parame-
ters, display lock, etc.
Hint:
The small image of the sauna cabin in the upper right corner in sub-menus functions as a
„ home “ button to allow quick return to the start screen at any time. Simply touch this image
shortly. Please remember that all not yet saved settings will be lost.
If you do not operate the control unit for more than 20 seconds the control unit will return to the
start screen. All not confirmed settings will be lost in this case.
Thanks to the integrated battery (CD2032 type, in control panel) all settings will be stored in the
memory and will be retained even in the case of a very long time power loss.
New extension modules and optional equipment will be normally automatically detected and
configured. Upon restart the control panel will show the corresponding new symbols in the
menu navigation.
Operation is based on the short or
long touching of the display.
By touching the display a small yel-
low square will appear in the low
right corner to indicate that the dis-
play is functional and gets the input.