EOS EmoTouch II +, User Manual And Operating Manual

Page: 10 / 30

10
GB
LSG LSG
Sauna lamp connection Heating time limitation
Connection of the power
extension unit
The switching capacity may be extended with
an external power extension unit (LSG), in or-
der to connect and operate the sauna heaters
above 9 kW power.
For connection details please refer to the instal-
lation and operation manual for the respective
LSG model.
The maximal heating time may be limited to 6
hours, 12 hours or to set unlimited.
In addition to the hardware setting the heating
time will be automatically limited depending of
the selected type of use.
If the control unit has been set to private (do-
mestic) use, then the heating time will be auto-
matically limited to 6 hours .
By commercial use the heating time limitation
may be set to up to 12 hours or to unlimited (by
supervised commercial saunas only).
!
The sauna lamp must have the protection
class of at least IPx4 and should be resistant to
the ambient sauna temperatures. The sauna
lamp may be installed at any location but never
close to the rising hot air of the heater.
Only dimmable lamps may be used. The control
unit will detect strongly inductive loads and
will adjust the phase edge control accordingly.
!
Attention! Make sure to use only dim-
mable illuminants. By connection of not dim-
mable illuminants there is a risk of damaging
either the illuminant or the control unit. No
warranty claims may be accepted in this case.