17
GB
Symbol description - extended settings
Language
Here you can select one of 18 languages for
the menu navigation and text messages:
DE, EN, FR, RU, ES, NL, IT, PL, SLO, FIN, TR, CZ,
RO, BG, HU, HR, SK, DK, CRO, CN
Date
Here you can set the date, month and year
(important for time-dependant functions like
the week timer)
Screensaver
Here you can set the time interval after which
the display shows a screensaver with a float-
ing clock.
Sleep mode
Here you can set the interval, after which the
control panel goes into the sleep mode in or-
der to save power. Touch the display to wake
up the unit.
Heating time
Here you can set the desired heating time. By
private use - up to 6 hours, by commercial use
- up to 12 hours or unlimited.
Display brightness
Here you can change the display brightness
in three steps.
Potential free (volt-free) contact
This function allows you to switch an external
equipment connected to the potential-free
output of the control unit.
Operation data
Here you can check the firmware version, the
remaining time until the next service, as well
as the contacts for service issues.
Display lock (child lock)
Here you can lock the unit with an own Pin-
code. It will be still possible to switch off the
heater and to switch the cabin light.
Please observe the special advice below
Time
Here you can the time of day.
Holiday home mode
Here you can restrict the user‘s access to the
minimum functions with an own Pin-code.
Update
With the update function your can flush or
update the installed firmware (requires a
standard SD card).
Important advice for Child Lock function
You can completely lock the control panel via
symbol with an individual pin-code. By active
lock you can only switch off the heater (if it is heating) and switch the cabin light. If you attempt
to reach any function you will be prompted to give in the pin-code.
!
How to reset the pin-code (unblock the unit):
Touch the settings symbol shortly in order to call the pin-code prompt menu. Now touch the display shortly
in the very upper left corner. The signs for the pin-code input will change for a very short time from „----“ to
„****“. During this time touch quickly the
symbol. The display will be unlocked and the unit will return
to the normal start screen.
„Extended settings“ sub-menu provides a range of additional functions, which normally need to
be set only once or quite seldom.
Touch the symbol
shortly to enter this sub-menu.
Summary of Contents for EmoTouch II +
Page 3: ...3 GB...
