28
D
You will find the rocker switch on the left side
of the main relay box. You can completely dis-
connect the control unit from the mains using
this switch.
!
Attention!
Parts of the printed cir-
cuit board will still remain energized in the
switched off condition! Risk of electric shock!
Device’s main switch
Device switched on.
Position II.
Default position.
Device switched off
(completely);
Position 0.
Light enabled;
Device switched off.
Position I.
The device „Switch-off“ switch
Press the switch on the left side of the rocker
to the first latch (
switch setting 0
). The switch
will be in the middle position. The unit is now
completely switched off (disconnected).
To turn the light on in the cabin while the unit is
still disconnected push the left side of the rock-
er to the second latch (
switch setting I
).
To make the unit ready for operation, switch back
to the initial position (
switch setting II
). The unit
will return to stand-by mode.
Summary of Contents for EmoTouch II +
Page 3: ...3 GB...
