background image

General safety precautions

• 

This device can be used by children aged 
8 upwards and by persons with physical, 
sensory, or mental disabilities, or who 
have inadequate experience and knowl-
edge if they are supervised or if they have 
received adequate instruction in how to 
use the device safely and understand the 
associated risks. Children may not play 
with this device. Children may not clean 
or carry out any user maintenance if un-
supervised. 

• 

Children are to be supervised in order to 
make sure that they do not play with this 
device.

• 

!

Attention

: It is forbidden to install 

the control box in a closed switch cabinet 
or behind a wooden panelling!

• 

The electrical installation may be done 
only by a qualified electrical technician.

• 

You must comply with the regulations of 
your power supply company and applica-
ble VDE regulations (DIN VDE 0100).

• 

!

 

WARNING

: Never attempt repairs or 

installations yourself, as this could result 
in serious injury or death. Only a qualified 
technician may remove the housing cover.

• 

Please note the dimensions in the assem-
bly instructions, especially when installing 
the temperature sensor. The temperature 
above the oven is critical for the temper-
ature setting. The temperature can be 

held within operating parameters and 
a minimal temperature gradient inside 
the bench area of the sauna cabin can be 
achieved only if unit is assembled correct-
ly.

• 

The device may only be used as intended 
as a control unit for sauna ovens up to 9 
kW (up to 36 kW when combined with a 
contactor box).

• 

Completely disconnect the control unit 
from the electrical circuit, i.e. flip all circuit 
breakers or the main circuit breaker during 
each installation or repair. 

• 

Please note the safety and installation 
information from the sauna oven manu-
facturer.

• 

Always heed the specifications and in-
structions of the cabin manufacturer, too.

7

GB

Summary of Contents for EmoTouch II +































Reviews: