26
GB
Potential-free contact
With the potential-free contact (output) you can switch an additional external device on or off.
This might be for instance an additional light circuit, music or some other feature. This function
has to be enabled in the basis setup and the external device has to be properly connected and
configured. The connection and configuration must be carried out only by an adequately qualified
personnel. Please contact your dealer for further details.
Please observe that the potential-free contact output only provides a switching signal (on / off).
In the main navigation menu touch the
symbol twice with a short interval. In the sub-menu
press on the
symbol to switch the external device on or on the
symbol in switch it off.
Hint: If you cannot find the symbol of the potential-free contact in the settings menu please con-
tact your local dealer to have this function enabled.
Firmware update
This function allows your to flush or update the installed firmware both in the control panel and in
the main relay box. For this an empty SD or SD-HC card will be required (not included in delivery
scope). Please contact your authorized dealer for further assistance.
!
Attention!
Do not attempt to update the firmware on your own without a competent assis-
tance. Malfunctions or faults caused by an unauthorized firmware flushing/update will lead to the
loss of warranty.
Summary of Contents for EmoTouch II +
Page 3: ...3 GB...
