25
GB
Operation data
Here you can check the important information concerning your control unit (sauna) operation.
Firmware
- allows to check the currently installed firmware version. Use “+” / “-” to switch
between two possible parameters. „Panel Vx.xx“ - shows the firmware in the control panel,
„Mod-LS Vx.xx“ - shows the firmware in the main relay unit (x stands for a number). Press on
the green arrow shortly to exit.
Service intervals
- allows to check the remaining time until the next pending servicing /
maintenance of your sauna. The intervals will be set by your dealer (installer) during the instal-
lation and setup.
Contacts
- shows you the contact information of the sauna control unit manufacturer or
your dealer (installer). This information will be also displayed by faults along with the error
messages.
Display brightness
Here you can set the display brightness in 3 stages.
Holiday home mode
With this function you can restrict the access to the control panel with your own pin code down
to the bare minimum of functions. All other functions will be disabled and their symbols will not
be displayed.
Following settings are possible when the holiday home mode is active:
•
Sauna on / off
•
Light on / off
•
Selection of the operation mode - dry or humid (only by Bi-O heaters)
•
Temperature setting
•
Humidity setting (only by Bi-O heaters)
To activate this mode touch the
symbol twice in settings menu. A sub-menu window with a
pin code input will open (similar to child lock). Given in your personal 4-digit pin code and confirm
the setting. The holiday home mode is now active. The display will return to the start screen.
Hint: To abort the pin code input, touch shortly the „Home“ button in the upper right corner.
In active holiday home mode after the sleep mode phase the display will first show the language
selection - confirm the preferred language, the display will return to the start screen.
To unlock the unit go to the settings menu. Touch the
symbol twice to launch the pin code
prompt menu. Give in your pin code to unlock the control panel.
!
How to reset the holiday home pin code
Touch the settings symbol to launch the pin code prompt menu.
Touch the display shortly in the top left corner. The four hyphens „----“ will turn for approx. 0,5 sec
into „****“ signs. Now quickly press the
button. The unit will be unlocked and the display will
return to the start screen.
Summary of Contents for EmoTouch II +
Page 3: ...3 GB...
