Envision One cDLM Page 35 Instruction Manual Download

Page: 35 / 73

Envision One cDLM® User Manual

www.envisiontec.com

TS-MAM-EnvisionOneCDLMUserManual-V5.0-FN-EN , 2021-12-15

Page 35 of 73

There is also an option for users to get a custom version of the Control Software that contains special features or

an early bug fix. Once that custom Control Software version is ready, users will receive an encrypted version number

and would be able to install that custom update on the printer.

To install the custom update of the Software version:

Go to

Settings | Printer Settings | Software Update

on your printer.

→ The

following screen appears.

2. Tap

[Change Version]

→

The following screen appears.

NOTICE

If no custom updates are installed yet, the Apply button will be grayed out.

3. Tap

[Add Version]

→ The following screen

appears.

4. Type in the encrypted version number.

→ The system adds the version to the list.

Summary of Contents for cDLM










































































Search results

Summary of Contents for cDLM

Reviews:

Related manuals for cDLM

Brands by name

Popular brands

Envision One cDLM, Instruction Manual

Search results

Summary of Contents for cDLM

Reviews:

Related manuals for cDLM

Brands by name

Popular brands