Envision One cDLM® User Manual
TS-MAM-EnvisionOneCDLMUserManual-V5.0-FN-EN , 2021-12-15
Page 17 of 73
5
Printer Delivery
5.1
Unpacking the Printer
Your Envision One printer will arrive in a wooden crate with a series of accessories boxes. The crate and boxes will
all be on top of a pallet. They will need to be taken to the site using a forklift or a pallet jack. Alternatively, the crate
and accessories boxes can be removed from the pallet and gently set on a dolly.
•
Crate
: Envision One cDLM, Starter Kit, USB drive
•
Optional Boxes
: Parts curing apparatus, PWA 2000 (parts washing apparatus), and battery backup if
purchased.
These tools are required to complete the unboxing process:
•
Box cutter/scissors
•
Flathead screwdriver
•
Hi-Lo/dolly
•
One helper.
Before opening the box, make sure that no visible damage can be observed, or any sensors are broken. If these
are present, please inform the office immediately.
If everything is in good condition:
1. Carefully cut the plastic wrap.
2. Remove the two boxes from the pallet.
3. Place the External Components box on a sturdy work surface, and place the Oxygen Concentrator box on
the floor nearby.
4. Remove the clips from the crate using a systematic approach. Use a flathead screwdriver to pry the metal
crate fasteners from the corners.
5. To remove the L brackets from the crate, slide the screwdriver under the end of the bracket with a break
in the metal. Leverage the bracket up, one side at a time until the bracket comes free from the crate. Take
the stack of brackets and set them off to the side. They will be used again to store the crate.
6. Disassemble the last removable side of the crate, remove the padding from the top and sides. Remove
the printer from the crate with a helper and place the printer on a stable desktop.
5.2
Starter Kit
The delivered starter kit includes useful tools for operating and cleaning the printer and the built parts.
•
Allen key, 3 mm
•
Build platform
•
Cone-shaped paint filters
•
Glass scraper
•
Digital calipers
•
Disposable domeless material tray
•
Rubber spatula
•
Paint scraper
•
USB drive
•
Wi-Fi Antenna
•
X-Acto knife
5.2.1
How to Use the Starter Kit
Scraper
The main use for the metal scraper is to remove the built parts from the build platform. Apart from this, the scraper
can also be used to remove material residues from the build platform.
For more information, check the
Models from the Build Platform
section.
Rubber Gloves
Make sure to always use the supplied protective gloves while working with resins!
X-Acto knife
Use it to cut the supports off your models as precisely as possible.
