Enterasys Security Information and Event Manager, Configuration Manual

Page: 85 / 426

Configuring DSMs
Cisco Wireless Services Module 69
• Mail - Facility level 2
• System Daemons - Facility level 3
•
Authorization - Facility level 4
• Syslog
- Facility level 5 (default value)
• Line Printer - Facility level 6
• USENET - Facility level 7
•
Unix-to-Unix Copy - Facility level 8
•
Cron - Facility level 9
• FTP Daemon - Facility level 11
• System Use 1 - Facility level 12
•
System Use 2 - Facility level 13
•
System Use 3 - Facility level 14
• System Use 4 - Facility level 15
• Local Use 0 - Facility level 16
•
Local Use 1 - Facility level 17
•
Local Use 2 - Facility level 18
• Local Use 3 - Facility level 19
• Local Use 4 - Facility level 20
•
Local Use 5 - Facility level 21
•
Local Use 6 - Facility level 22
• Local Use 7 - Facility level 23
Step 6
Click Apply .
Step 7
From the Buffered Log Level and the Console Log Level drop-down list boxes,
select the severity level for log messages to the controller buffer and console using
one of the following options:
Emergencies - Severity level 0
Alerts - Severity level 1
Critical - Severity level 2
Errors - Severity level 3 (default value)
Warnings - Severity level 4
Notifications - Severity level 5
Informational - Severity level 6
Debugging - Severity level 7
If you set a logging level, only those messages whose severity is equal to or less
than that level are logged by the controller. For example, if you set the logging level