Enterasys Security Information and Event Manager, Configuration Manual

Page: 170 / 426

Configuring DSMs
154 IBM
// DCB=(RECFM=VB,LRECL=1028,BLKSIZE=6144)
//EXTRACT EXEC PGM=QEXIMS,DYNAMNBR=10,
// TIME=1440
//STEPLIB DD DISP=SHR,DSN=Q1JACK.C.LOAD
//SYSTSIN DD DUMMY
//SYSTSPRT DD SYSOUT=*
//SYSPRINT DD SYSOUT=*
//IMSIN DD DISP=SHR,DSN=&IMSIN
//IMSOUT DD DISP=SHR,DSN=&IMSOUT
//*FTP EXEC PGM=FTP,REGION=3800K
//*INPUT DD *
//*<target server>
//*<USER>
//*<PASSWORD>
//*ASCII
//*PUT '<IMSOUT>' /TARGET DIRECTORY>/<IMSOUT>
//*QUIT
//*OUTPUT DD SYSOUT=*
//*SYSPRINT DD SYSOUT=*
//*
Step 7
After the output file is created, you must choose one of the following options:
a
Schedule a job to transfer the output file to an interim FTP server.
Each time the job completes, the output file is forwarded to an intermin FTP
server. You must configure the following parameters in the sample JCL to
successfully forward the output to an interim FTP server:
For example:
//*FTP EXEC PGM=FTP,REGION=3800K
//*INPUT DD *
//*<target server>
//*<USER>
//*<PASSWORD>
//*ASCII
//*PUT '<IMSOUT>' /TARGET DIRECTORY>/<IMSOUT>
//*QUIT
//*OUTPUT DD SYSOUT=*
//*SYSPRINT DD SYSOUT=*
Where:
<target server> is the IP address or host name of the interim FTP server to
receive the output file.
<USER>
is the user name required to access the interim FTP server.
<PASSWORD>
is the password required to access the interim FTP server.
<IMSOUT>
is the name of the output file saved to the interim FTP server.
For example: