Enterasys Security Information and Event Manager, Configuration Manual

Page: 263 / 426

Configuring DSMs
Nortel Multiprotocol Router 247
fault-map critical
info-map info
name WILDCARD
severity-mask {fault warning info trace debug}
slot-lower-bound 0
slot-upper-bound 1
state enabled
trace-map debug
warning-map warning
Step 13
View the currently configured settings for the syslog filters:
show syslog filters
When the syslog and filter parameters are correctly configured, the Operational
State indicates
up
.
For example:
syslog# show syslog filters
show syslog filters Sep 15, 2008 18:21:25 [GMT+8]
Step 14
View the currently configured syslog host information:
show syslog log-host
The host log is displayed with the number of packets being sent to the various
syslog hosts.
For example:
syslog# show syslog log-host
show syslog log-host Sep 15, 2008 18:21:32 [GMT+8]
Step 15
Exit the command interface:
a
Exit the current command line to return to the bcc command line:
exit
b
Exit the bbc command line:
Host
IP address Filter
Name Entity
Name Entity
Code Configured
State Operational
State
10.11.12.130 WILDCARD all 255 enabled up
10.11.12.210 WILDCARD all 255 enabled up
Host
IP address Configured
State Operational
State Time
Sequencing UDP
Port Facility
Code #Messages
Sent
10.11.12.130 enabled up disabled 514 local0 1402
10.11.12.210 enabled up disabled 514 local0 131